THERMOTOP PIR INSULATION BOARDS

THERMOTOP are thermal insulation boards with the lowest thermal conductivity coefficient, λ = 0,022 W/mK, made of PIR foam, with aluminum foil or membrane faces acting as a water vapor diffusion barrier, available in various thicknesses.

PIR THERMOTOP boards are recommended for any thermal insulation project of foundations, floors, facades, floors, accessible/non-accessible terraces, or any type of roof.

Thermotop thermal insulation has been designed to meet current requirements for energy efficiency and thermal comfort in construction, being the most performing alternative to classic thermal insulation materials.

Available variants:

  • vapor barrier (BV)
  • aluminum foil (AL)

Available thicknesses:

  • 30 mm - 150 mm

Board dimensions:

  • 2400 mm x 1200 mm 1200 mm x 1200 mm

Applicability:

  • Foundations
  • ETICS facade thermo-system
  • Exterior walls
  • Ventilated facades
  • Pitched roofs
  • Accessible/non-accessible terraces
  • Terraced roofs for industrial buildings

TYPES OF THERMOTOP PIR BOARDS

ADVANTAGES OF THERMOTOP PIR THERMAL INSULATION BOARDS

By thermally insulating with Thermotop boards, you meet the standards for passive house and nZEB (nearly zero-energy building).


  • Excellent thermal insulation: up to 100% more efficient than other thermal insulation methods
  • Avoiding the thermal bridge phenomenon due to the “L” type joint
  • Reduced assembly time by up to half, due to the size and weight of the boards
  • Reduces the thickness of structural elements
  • Thermal performance at reduced thicknesses. Maximizing usable space
  • Compatible with any type of waterproofing
  • Compatible with all types of plasters and finishes
  • Compatible with the installation of photovoltaic panels
  • Suitable for new construction and renovations
  • Durability for decades
  • Sustainable
  • Eco Friendly

THERMOTOP TECHNICAL CHARACTERISTICS


  • Thermal conductivity coefficient: 0.022 W/mK
  • Compressive strength: ≤130 - ≥170 kPa
  • Moisture resistance: Does not allow moisture penetration
  • Fire resistance: up to 30 minutes depending on board thickness
  • Dimensional stability: no mechanical deformations over time
  • “L” type joint: minimizing thermal bridges
  • Low weight of the boards
  • Chemically inert and safe to use
  • High resistance to chemicals and solvents. Does not develop mold or other microorganisms
  • Does not constitute a food source or shelter for rodents
  • Resistant to extreme weather conditions (-40°C and +110°C)
  • Does not contain CFC/HCFC

BENEFITS OF THERMOTOP PIR INSULATION BOARDS

Thermal insulation up to 100% higher than traditional materials

Due to the unique structure and properties of the materials used, the thermal insulation boards offer high thermal resistance and prevent heat transfer through conduction, convection, and radiation.

Reduced Thickness, Maximum Thermal Performance

THERMOTOP offers excellent thermal insulation, despite the reduced thickness of the boards. For example, a THERMOTOP board with a thickness of 50 mm can provide the same thermal resistance as an expanded polystyrene board with a thickness of approximately 100 mm or mineral wool with a thickness of 100 mm.

Versatility, Speed, Reduced Installation Time

THERMOTOP boards can be faced with a vapor barrier (BV) or aluminum foil (AL), so that the specific functions of the space where they are installed are maximized. Quick installation reduces the completion time of a construction project by up to half.

Eco-friendly and Sustainable Product

THERMOTOP products are manufactured in compliance with the ISO 14001 environmental management system, and THERMOTOP PIR insulation is classified as A in the BRE Green Guide, representing excellent performance in terms of environmental protection. The thermal insulation systems produced by us do not contain CFK/HCFK and have a global warming potential (GWP) that is 5 times lower.

Products Developed for the Customer

Every product range in the TOPANEL portfolio, including THERMOTOP, has been developed in accordance with customer needs, to whom we aim to offer high-quality products and services. The THERMOTOP team can advise you in choosing the best solutions regarding the thermal insulation of any construction project you have planned.

RECENT ARTICLES

TOPANEL the first manufacturer of Thermal Insulation Panels in Romania with an Environmental Product Declaration In the construction industry, choosing the appropriate materials is essential for obtaining durable, energy-efficient structures with a reduced… READ MORE
Are thermal insulation panels efficient in optimizing energy costs generated by heating or cooling buildings? The construction industry has undergone impressive transformations throughout history, and currently this evolution continues at a sustained pace.… READ MORE
What is the price per square meter of thermal insulation panels? Guide for investment evaluation Regardless of whether you intend to build a modern industrial hall, construct an efficient warehouse, or arrange a… READ MORE
TOPANEL Metal Structures for Ground-Mounted Photovoltaic Parks In a global effort to combat the impact of global warming, European and local authorities are investing significantly… READ MORE